Event-triggered attitude control of spacecraft

The problem of spacecraft attitude stabilization control system with limited communication and external disturbances is investigated based on an event-triggered control scheme. In the proposed scheme, information of attitude and control torque only need to be transmitted at some discrete triggered times when a defined measurement error exceeds a state-dependent threshold. The proposed control scheme not only guarantees that spacecraft attitude control errors converge toward a small invariant set containing the origin, but also ensures that there is no accumulation of triggering instants. The performance of the proposed control scheme is demonstrated through numerical simulation.     

Orbit determination and prediction of GEO satellite of BeiDou during repositioning maneuver

In order to establish a continuous GEO satellite orbit during repositioning maneuvers, a suitable maneuver force model has been established associated with an optimal orbit determination method and strategy. A continuous increasing acceleration is established by constructing a constant force that is equivalent to the pulse force, with the mass of the satellite decreasing throughout maneuver. This acceleration can be added to other accelerations, such as solar radiation, to obtain the continuous acceleration of the satellite. The orbit determination method and strategy are illuminated, with subsequent assessment of the orbit being determined and predicted accordingly. The orbit of the GEO satellite during repositioning maneuver can be determined and predicted by using C-Band pseudo-range observations of the BeiDou GEO satellite with COSPAR ID 2010-001A in 2011 and 2012. The results indicate that observations before maneuver do affect orbit determination and prediction, and should therefore be selected appropriately. A more precise orbit and prediction can be obtained compared to common short arc methods when observations starting 1 day prior the maneuver and 2 h after the maneuver are adopted in POD (Precise Orbit Determination). The achieved URE (User Range Error) under non-consideration of satellite clock errors is better than 2 m within the first 2 h after maneuver, and less than 3 m for further 2 h of orbit prediction.     

一种手持式太赫兹探测系统的光学及结构设计*

随着现代安检技术与健康、隐私问题之间的矛盾愈加突出,人们迫切需要高效、便捷、安全的安检技术。首先介绍太赫兹非成像光谱探测技术的原理,提出适合于安检应用的太赫兹光谱探测系统技术指标,然后基于ZEMAX设计出配合该技术指标的光学系统,采用非序列模式对其进行仿真和评价,最后基于ProE设计完成了配合上述光学系统的紧凑型探测系统结构,实现了探测系统的手持式应用。     

民用飞机副翼舱结构振动疲劳寿命预计

副翼舱是民用飞机重要部件之一,主要作用为连接副翼并对安装副翼提供支持,将副翼的气动载荷传递到主翼盒上。当受到气动力及其他激励时副翼舱结构产生结构振动响应。副翼舱结构振动疲劳寿命需满足民用飞机适航条款要求,为表明满足适航条款符合性,对随机动载荷激励下副翼舱结构进行振动疲劳寿命预计具有重要意义。以民用飞机副翼舱结构为研究对象,基于试飞实测应变数据、金属材料的随机振动S-N曲线和改进声疲劳寿命估算法,提出了一种适用于振动疲劳寿命预计的工程处理方法。通过飞行试验、有限元仿真、数据分析等相结合的方法进行副翼舱结构优化前后的振动疲劳寿命预计。副翼舱结构优化前损伤位置预测寿命最低为59飞行小时,符合实际损伤位置寿命情况。副翼舱结构优化后应力水平明显降低,寿命满足要求。结果表明：基于实测数据的副翼舱结构振动疲劳寿命预计方法有效,可作为振动疲劳寿命预计的工程处理方法。     

真空出气对星用聚酰亚胺材料电导率的影响

卫星介质材料在真空环境下的出气有可能对材料本身的介电性能产生显著影响,增加长期服役卫星寿命末期的充放电风险。文章以卫星上常用的聚酰亚胺材料为对象,通过地面90Sr-90Y辐照源加速辐照试验研究了在材料真空出气后其表面充电平衡负电位的变化,并据此计算出材料电导率的变化规律。结果显示,在5 pA/cm2电子辐照强度下,聚酰亚胺样品的电导率随着出气量的增加而明显下降,在总质量损失达到0.5%时,电导率减小一半左右。初步分析了出气导致电导率下降的物理机制。研究结果对卫星寿命末期充放电防护设计有指导意义。     

具有较大零相关窗补序列集的构造

为了降低甚至消除近似同步码分多址(Approximately-synchronized code-division multiple-access,AS-CDMA)系统的多径干扰和多址干扰(Multiple access interference,MAI),满足系统不断增大的用户容量需要,提出了零相关窗补序列集和零相关窗补序列集的构造方法。零相关窗补序列集比传统补序列集具有更多的序列数目,应用到通信系统中可以支持更多的通信用户。本文基于完美序列和行正交矩阵,构造了两类具有较大零相关窗补序列集:第一类是运用完美序列的自相关性质和行正交矩阵的正交性构造了一类最优的零相关窗补序列集;第二类以同样的方式,构造了一类几乎最优的零相关窗补序列集。     

基于压差梯度的平流层飞艇艇囊应力计算和仿真

平流层飞艇体积庞大,艇囊表面曲率小,因而蒙皮材料的局部应力集中极易导致飞艇艇囊蒙皮发生过大变形而迅速超压损伤破坏.基于飞艇艇囊内外压力压差梯度载荷条件,建立飞艇艇囊蒙皮受内外压差真实工况下环向与轴向应力的理论计算模型,构建飞艇蒙皮应力分析的Von Mises强度准则.并采用ABAQUS有限元软件非线性仿真艇囊蒙皮分别在超压300,500,800 Pa载荷下的各点环向的Von Mises应力状况.仿真结果与理论模型计算的应力值基本保持一致,飞艇艇囊蒙皮环向Von Mises应力呈现随压差梯度增大而递增的规律,而轴向Von Mises应力大小由环向Von Mises应力、蒙皮局部经纬向曲率共同决定,且两方向的Von Mises应力均与超压载荷大小成正相关关系,为飞艇艇囊蒙皮超压应力评估和强度计算提供基础性研究.     

Tropospheric wet refractivity tomography using multiplicative algebraic reconstruction technique

Algebraic reconstruction techniques (ART) have been successfully used to reconstruct the total electron content (TEC) of the ionosphere and in recent years be tentatively used in tropospheric wet refractivity and water vapor tomography in the ground-based GNSS technology. The previous research on ART used in tropospheric water vapor tomography focused on the convergence and relaxation parameters for various algebraic reconstruction techniques and rarely discussed the impact of Gaussian constraints and initial field on the iteration results. The existing accuracy evaluation parameters calculated from slant wet delay can only evaluate the resultant precision of the voxels penetrated by slant paths and cannot evaluate that of the voxels not penetrated by any slant path. The paper proposes two new statistical parameters Bias and RMS, calculated from wet refractivity of the total voxels, to improve the deficiencies of existing evaluation parameters and then discusses the effect of the Gaussian constraints and initial field on the convergence and tomography results in multiplicative algebraic reconstruction technique (MART) to reconstruct the 4D tropospheric wet refractivity field using simulation method.     

VTS雷达站选址问题优化模型

船舶交通管理系统（VTS,Vessel Traffic Services）雷达站选址方案对整个系统的功能正常发挥有重要影响.首先运用多层次模糊综合评价方法对雷达站候选点进行初选;然后建立了雷达站选址双目标优化模型,第1目标为总成本最小,包括雷达站的建设成本和雷达站与VTS中心的线路铺设成本,第2目标为被多重覆盖的水域单元权重之和最大;最后针对模型设计了遗传算法.算例分析显示,模糊综合评价可能去掉一些候选点,使得目标函数值变差,但是增加了方案的实际可行性.将程序运行10次,计算结果具有稳定性,本算法是收敛和稳定的,模型是可行的.     

回流燃烧室复合冷却结构冷却效果研究

为了研究回流燃烧室火焰筒壁面不同冷却结构形式的冷却特点,设计了3种冷却结构形式,采用试验方式分别对其冷却效果进行了试验研究,得出了如下结论:在相同的壁面开孔率下,(1)吹风比对冷却效率影响显著,随着吹风比的增大冷却效率升高;(2)在火焰筒的不同区段,不同的冷却结构表现出不同的特点;(3)沿整个火焰筒壁面,冲击+逆(同)向对流+气膜冷却结构的冷却效率变化剧烈,而冲击+发散冷却结构的冷却效率沿火焰筒壁面变化较为平缓,火焰筒壁面温度沿流向分布均匀,温度梯度小。这说明对于回流燃烧室,当壁面采用复合冷却结构时,采用全冲击发散冷却结构较为适宜。